Bind
[[meta bind projects]]Tasks
- Enlarge the display section ➕ 2025-08-21 ✅ 2025-08-21
- Improve the edge placement section — it should come forward by 1 mm and also make those retention points you added larger; make the circles 1.5 in diameter ➕ 2025-08-21 ✅ 2025-08-21
- Design in print version 3 ➕ 2025-08-21 ✅ 2025-08-21
- Improve the design and styling on the back ➕ 2025-08-21 ✅ 2025-08-21
- Add code upload capability via WIFI ➕ 2025-08-22 ✅ 2025-08-22
- Solder the keypad wires to the ESP board ➕ 2025-08-22 ✅ 2025-08-22
- Design a custom board for personalized 3D design for the front in the future ➕ 2025-08-22
- Fix the bug where lack of WIFI causes it to hang and not boot ➕ 2025-08-22 ✅ 2025-08-22
- In the menu, for example the battery, the refresh rate is very high ➕ 2025-08-22 ✅ 2025-08-22
- Add a Bluetooth activation screen and ability to go forward/back (e.g., in PIDF, etc.) with keys 4 and 6 ➕ 2025-08-22 ✅ 2025-08-22
- Add the ability to turn the screen off after n if not active ➕ 2025-08-23 ✅ 2025-08-23
- Add password entry capability ➕ 2025-08-23 ✅ 2025-11-15
- Add a lock for the device ➕ 2025-08-23
- Optimize and better organize the code ➕ 2025-08-23 ✅ 2025-08-23
- Fix deep sleep bug during updates ➕ 2025-08-23 ✅ 2025-08-23
- Make the display more attractive ➕ 2025-08-23
- Improve Bluetooth connection section, add more features, fix text issues and excessive refreshing ➕ 2025-08-23 ✅ 2025-08-23
- On boot, display that it’s trying to connect to WiFi ➕ 2025-08-23 ✅ 2025-08-23
- Move code like rendering, etc., to the second core ➕ 2025-08-23
- I need to add a laser ➕ 2025-08-24 ✅ 2025-11-15
- Add the ability to connect to a personal server or any way to transfer daily tasks from Obsidian to this ➕ 2025-08-25
- Buy parts to build a new and better version; purchase separately: ESP32 and a display that supports external SD Card ➕ 2025-08-25
- Improve the automatic screen shutdown feature ✅ 2025-11-15
- Add Pomodoro feature ➕ 2025-08-25 ✅ 2025-08-25
- Fix bug in date display after restart ➕ 2025-08-25 ✅ 2025-08-26
- Fix bug: enable Wi-Fi when turned on from settings ➕ 2025-08-25 ✅ 2025-08-25
- Reprint, this time with PLA ➕ 2025-08-26 ✅ 2025-08-26
- Fixed the Pomodoro bug where, after booting, the device goes directly into Pomodoro mode ➕ 2025-08-26 ✅ 2025-08-26
- Improved the sleep and display code sections to reduce power consumption ➕ 2025-11-15 ✅ 2025-11-15
- Connect a larger battery ➕ 2025-11-15
Log
2025-08-20
This version I designed today wasn’t good because not only did the board itself not fit inside it, but I also gave the wrong dimensions and it’s too small.
2025-08-21 01:57
The print of version 2 wasn’t great because something happened during printing and it caused the print to fill a layer and not print correctly. Note for next time: use less glue stick or smooth it beforehand.
2025-08-21 09:52
I tried printing it again and edited it; I hope it prints without problems — I really don’t want
2025-08-22 16:23
Today I fixed some of your issues. I printed the back door twice; both times I messed up and it got ruined, but now the back door is without supports.
2025-08-22 16:47
This is really awesome that you can upload code over Wi‑Fi — it gave me goosebumps even though I already knew it.
2025-08-22 19:29
It works great. I just tested it, changed the codes, and it runs like a Benz.
2025-08-22 21:25
There was a problem — I had connected pin 33 to 39. It’s fixed now; the system didn’t crash.
2025-08-23 21:10
The code has improved a lot. Now it’s easy to tweak the code for each part because it’s clear what each section is for.
2025-08-25 00:41
I improved many parts of the display and the code; there’s still a lot of work left to do and my time is very limited.
2025-08-25 18:36
I need to, after I fix all the sections and pages and add other modules like SD reading, laser, etc., completely redesign the app’s frame and UI from scratch.
2025-08-26 20:20
This morning when I woke up, I decided to print it with PLA instead of ABS, and that turned out to be a good call. The print quality was much better because it did not warp.
2026-01-25 23:23
Overall, it turned out well. I think a few features need to be added, the most important one being a LoRa transmitter. The design also needs to be modified in several areas. The biggest issue is that the battery cannot be physically disconnected. Later, I need to add a wire and a switch; otherwise, it keeps draining quickly, which is not ideal.
With the current buttons, I should also add a keyboard interface so that Wi-Fi credentials and other inputs can be entered directly.
